MVD-1000A1/MVD-1000D1型数显显微硬度计是光机电一体化的高新技术产品，该仪器造型新颖、美观，而且它具有良好的可靠性，可操作性和直观性，是显微硬度计的升级换代产品。
该机采用计算机软件控制，高倍率光学测量系统，光电传感器等技术实现测量装置与压头自动切换，通过软件输入，光源的强弱自动调节，并选择维氏与努氏试验方法、保持时间、文件号与储存等，提供了各种硬度值的转换表以供参考，在LCD大屏幕显示屏上能显示试验方法、试验力、测量压痕长度、硬度值、试验力保持时间，测量次数并能键入年、月、日期，试验结果和数据处理等，通过打印机输出。
该机采用高倍率光学测量系统，目镜鼓轮一次读数。可测定钢、有色金属、IC薄片、薄塑料、金属薄片、涂层、表面覆层、层压金属、热处理碳化层和淬火硬化层的深度与硬度梯度。
MVD-1000A1/MVD-1000D1 type the Digital Micro Hardness Tester Is light, mechanical, electrical integration of high-tech products, equipment Modeling novel, beautiful, and it has a good reliability, operability and intuitive, is micro-hardness tester of the upgrading of products.
The machine used computer software control, high-magnification optical measurement systems, photoelectric sensor technology such as measurement devices and automatic switching pressure head, through the software importation , the strength of light automatic adjustment, and select Vickers and Knoops test, and dwell time , And storage of documents, offers a variety of hardness value of the conversion table for reference, in the large-screen LCD screen can display test methods, testing, and measuring the length of indentation, hardness, the pilot of the hold time, measuring frequency And to type the year, month, date, test results and data processing, and so on, through the printer output.
That machine adopts the high magnification optics the diagraph the system,the eyes drum round is a to read the number.Can measurese the steel,have the color metals,the thin slice of IC,thin plastics,metals thin slice and draw the layer,surface layer,layer press the metals,heat handles the carbonization layer hardens the depth of the layer with the fire of and degree of hardness steps degree.
| 技术规格 | Main technical parameters |
| 显微硬度标尺: | Vickers scales: |
| HV0.01,HV0.025,HV0.05,HV0.1,HV0.2,HV0.3,HV0.5,HV1 | HV0.01，HV0.025，HV0.05，HV0.1，HV0.2,HV0.3，HV0.5, HV1 |
| 显示:自动读数菜单显示5位数的硬度值,4位数的对角线长度（D1，D2）, | Display: Hardness value 5-digit |
| 试验力,保持时间,测试次数,平均值,标准偏差,返回 | Diagonal length 4-digit(D1,D2) |
| | Load duration Dwell time(sec) |
| | Statistics No.,average,Standard deviation |
| | Return |
| 试验力(gf):10，25，50，100，200，300，500，1000 | Test force(gf):10，25，50，100，200，300，500，1000 |
| 加载控制:自动（加载/保持/卸载） | Load control:automatic(loading/dwell/unload) |
| 试验力保持时间(s):5～60 | Total test force dwell time(S):5~60 |
| 试验力选择:外置式选力旋钮 | Test force selection:External force election knob |
| | the test showed strength in LCD screen |
| 物镜放大倍数:10×，40× | Objective magnification:10×，40× |
| 光通道:双光通道（目镜及CCD摄象通道） | Optical path:2-way switchable(eyepiece and camera) |
| 测量目镜:自动数字式编码器 | Measuring eyepiece:Automatic digital encoders |
| 总放大倍数(μm):100×（观察）, 400×（测量） | Total magnification:100×（Observation）, 400×（measurement） |
| 测量范围(μm):200 | Measuring range(μm): 200 |
| 分辨率(μm):0.01 | Resolution:(μm):0.0625 |
| 测量范围:(5-3000)HV | Measuring range:(5-3000)HV |
| XY试台 尺寸(mm):100×100 | XY stage Dimensions(mm):100×100 |
| 行程范围(mm):25×25 | Travel range(mm):25×25 |
| 小读数(mm):0.01 | Minimum reading: 0.01 |
| 试件高度(mm):85（2.55") | Max height of speciments(mm)：85（2.55") |
| 试件宽度(mm):120(3.35")(从压头中心线至机壁距离） | Distance from indeneters center to outerwall(mm)：120 |
| 输出:内置微型打印机，（RS232串行接口） | Output:built-in printer(RS232 serial) |
| 电源电压:AC220V/50HZ | Power supply:AC220V/50HZ |
| 外形尺寸(mm):490×310×515 | Dimensions(mm):490×310×515 |
| 重量(kg):35 | Weight(kg):35 |
